n-a

The GETH-COAX-TX-OF is a transmitter module designed for the transmission of Ethernet data and PoE power via coaxial cable. It is fitted with an RJ45 socket and a BNC connector and enables bidirectional network communication at speeds of up to 1 Gb/s. Depending on the length and quality of the cable used, it is possible to achieve a data rate of 1000 Mb/s over a distance of up to 500 m and 50 Mb/s over a distance of up to 1000 m. The module is compatible with other devices in the GETH-COAX series, enabling the use of existing coaxial cable infrastructure to build an Ethernet network. By using additional PoE extenders, it is also possible to power several IP cameras using a single coaxial cable, which is particularly useful in installations where replacing the existing cabling is difficult or uneconomical.Key features:Ethernet transmission up to 1 Gb/scoaxial cable transmission up to 1,000 mPoE power supply up to 60 Wsupport for 802.3af/at/bt PoE standardsBNC connector and RJ45 portsupport for 50 Ω and 75 Ω cablestransmission encryption capabilitysupport for various network topologiesOpen Frame version for installationThe GETH-COAX-TX-OF can be powered directly from a PoE switch via an RJ45 port compliant with the 802.3af/at/bt standard, or locally with a voltage of 24–56 VDC via the POWER screw terminal. When powered via PoE, a single module can support up to 4 GETH-COAX-RX-OF receivers, whilst using local power supply allows for the connection of a greater number of devices. The modules can be connected in various topologies, including star, bus and tree, whilst the BNC connector allows them to be connected in various combinations, e.g. TX to RX, RX to RX or TX to TX. The devices feature data encryption, clear LED indicators for operating status, transmission and bandwidth, and the ability to monitor connection parameters via a web browser. The module has a MAC address, whilst the IP address is automatically assigned by a DHCP server.The OF (Open Frame) version has been designed for installation in any enclosure, particularly in dedicated ABOX series enclosures and on mounting plates with 10.8 mm pitch holes. The device does not require any complicated configuration and automatically adapts to the parameters of the cable used once connected. The modules can operate with coaxial cables with impedances of 50 Ω and 75 Ω. Please note that the GETH-COAX-TX-OF and GETH-COAX-RX-OF are sold separately, and at least two modules connected by a coaxial cable via BNC connectors are required for correct operation. The maximum transmission distance depends, amongst other things, on the length and cross-section of the cable, the quality of the connectors and the number of intermediate connections. Model Tip produs Convertor Ethernet la cablu coaxial Producător ATTE Intrare număr 1 Tip conector RJ-45 Gigabit Ieșire număr 1 Tip conector BNC Tensiune conector RJ-45 V 802.3af/at/bt60 Temp. funcționare °C -25 ... +65 Dimensiuni mm 51(73) x 51 x 23, 90 × 35 × 21.5